Arrowsmith takes-off with MSC

Matthew Garbet of MSC and Martin from Arrowsmith working together
Matthew Garbet of MSC and Martin from Arrowsmith working together

As a prominent Tier 1 subcontract supplier to some of the world’s leading aerospace OEMs, Queen’s Award for International Trade winner Arrowsmith Engineering has a reputation for being a high-quality fast response business. To assist with a recent tender to machine an order for aerospace components, Arrowsmith turned to trusted partner MSC Industrial supply for product and applications support. PES reports.

Arrowsmith has like most companies witnessed challenges throughout the pandemic. As an SC21 Silver accredited company with customer approvals from the likes of Rolls-Royce, GKN, ITP, Bombardier, Eaton and Meggitt, Arrowsmith’s pedigree is unquestionable.

For the West Midlands company, the pandemic induced challenges facing the aero sector have been overcome by diversifying and adapting to market forces and relying upon the expertise of its supply chain, and in particular MSC Industrial Supply Co.

Arrowsmith, like the entire aerospace industry, has witnessed the perfect storm of reduced orders and output, COVID compliant distancing and temporarily forced staff reduction levels via the furlough scheme – all created by worldwide flight restrictions.

However, the business has overcome numerous industry downturns in its five decades of business, and this experience has seen the company once again adapt to market conditions. With MSC supporting Arrowsmith over the last five years to deliver cost-reductions and productivity savings of more than £500,000, Arrowsmith has again called upon its supply partner.

The challenge

With a temporary dip in aerospace work, Arrowsmith was intent on winning new business during the pandemic; a significant challenge when faced with COVID compliant remote working and social distancing. The AS9100 and ISO14001 certified manufacturer was in the tender process with an aero-engine OEM to undertake the machining of more than 50 aluminium engine components.

Arrowsmith turned to MSC to support the project. Arrowsmith wanted to know if MSC could firstly support them to undertake the project with product and application support; secondly, could MSC meet the tight dimensional and surface finish criteria specified within the project and finally, could MSC engineers reduce the number of processes and projected production times? The answer to all three questions was yes!

MSC application engineer Matthew Garbett reviewed Arrowsmith’s proposed machining strategy for the parts and set about improving the process. In normal circumstances, this is part of the daily job for any of MSC’s applications and engineering team – but with COVID restrictions in place, Mr Garbett had to undertake the challenge remotely.

Working as an extension of the Arrowsmith engineering team, the MSC engineer reviewed the proposed strategy for five set-ups on two 3-axis machining centres and subsequently adapted the process to two set-ups on a single 5-axis machine.

The solution


The MSC engineer was given the work envelope and axis movement dimensions of the Leadwell V40i 5-axis VMC and intuitively configured a solution with Lang Technik, the existing workholding provider at Arrowsmith.

The solution included the adaptation of the existing zero-point clamping system to add a secondary clamping plate and two Lang vices for holding the extra-long parts. Lang Technik assisted MSC to offer Arrowsmith a viable solution; Mr Garbett had managed to theoretically reduce set-ups and subsequently eliminate the opportunity for dimensional error that can occur from multiple set-ups.

With the machine, work envelope, and workholding configuration defined, Mr Garbett was supplied the CAD drawing and model of the component by Arrowsmith. In this instance he programmed the dimensions of the machine with Autodesk’s Fusion 360 package and then exported the data to Autodesk PowerMill to programme the toolpaths and machining strategy.

Commenting Mr Garbett says: “On the shopfloor, Arrowsmith use Alphacam as their preferred CAM system. Our current library of post-processors was relevant to their Leadwell 5-axis machine which meant we could provide a stable, secure machining process in PowerMill that would be free from potential collisions whilst ensuring machining strategies were optimised.”

The right tools for the job


As well as remote programming and defining a machining strategy, it was important to select the right cutting tools to yield optimum results. The diverse portfolio of brands and a seemingly endless range of cutting tools available from MSC provided the optimal solution.

Matthew Garbett continues: “Based on our experience, we know that machining aluminium aerospace components of this type would be best suited to the solid carbide milling range offered by SGS Carbide. Sharing the details of the project with Steve Neale, a senior application engineer at SGS, we remotely created and optimised a selection of cutting tools that would enhance machining performance and tool life whilst consolidating the number of tools required.”

The MSC strategy was to face machine the top of the part and add the location features for the zero-point clamping system. The second set-up was to undertake the complete machining of the remaining faces, edges, pockets, chamfers, holes and threads.

The tools selected for the process were a Kennametal face mill with three indexable inserts that cost-effectively replaced a previous six-insert face mill, as well as a solid carbide Accupro drill and a DC Swiss threading tool.

Following the heavy material removal operation, MSC collaborated with SGS and used a series of two, three, and four-flute solid carbide end mills, ranging from 2 to 16mm in diameter. Both square end and ball nose designations were utilised for machining all features, including edge radii, pockets and slots.

Putting theory into practice


Once lockdown restrictions were relaxed and site visits were allowed, an appointment was planned. With the CAM programme and post-processor in place, MSC’s Matthew Garbett and Steve Neale from SGS worked in collaboration with Arrowsmith engineers to set-up the machine, running preliminary parts and optimising the cutting speeds and feeds in accordance with the parameters of the machine.

Whilst the machining strategy was in place, the cutting speeds and feeds had to be tweaked on the machine, as the workholding set-up and machining strategy had the potential for part deflection.

The results


By undertaking the project remotely, MSC succeeded in integrating this complex machining process into the shopfloor at Arrowsmith. By adapting the machining strategy to just two set-ups, MSC has guaranteed process stability for critical aerospace components with tolerances across the part tied to less than 50µm.

MSC has instigated a machining strategy that is yielding a cycle time of just two hours 20 minutes for the very complex parts whilst demonstrating exceptional surface finishes. Furthermore, by using specific cutting tools from SGS Carbide, Accupro and Kennametal, MSC reduced tooling costs and consumption via improved tool life and greater flexibility and autonomy for all aluminium machining tasks.

Commenting, Martin Porter, general manager at Arrowsmith says: “MSC has collaborated with us on several complex projects over the last four years. On this occasion, their application engineer, Matthew Garbett, worked alongside and remotely with our engineering team.

“His level of expertise and commitment was instrumental in helping us to secure future projects. MSC shares our ambition to be the best we can be, so like us they see the importance of creating efficient and cost-effective processes at every stage of production.”

In conclusion, MSC’s national account manager Oliver Latchford says: “Conducting remote working to such an extent has been a true testament to the expertise MSC engineers have, and also our relationships and understanding of our customers and their needs.

“In this instance, Arrowsmith approached MSC with set criteria, and we have successfully fulfilled and exceeded the requirements. More manufacturers are bringing our engineers into the manufacturing process at a much earlier stage than ever before at the new product introduction phase. By utilising our expertise and solutions at such an early stage, we can yield huge benefits for the end-users.”

Arrowsmith Engineering www.arrowsmitheng.co.uk

MSC Industrial Supply www.mscdirect.co.uk

Related Articles

Flying high for engineering

The Farnborough International Airshow (FIA) is a showcase to display some of the UK’s most advanced manufacturing. Ed Hill hears how the organisers are helping the industry to generate new business.
7 years ago Features

Farnborough closes on a real high

At the close of the Farnborough International Airshow five day trade exhibition organisers confirmed that the show had recorded orders and options to the value of US$123.9 billion defying industry expectations.
7 years ago News

Making the grade in aerospace

To ensure that the most efficient, cost-effective cutting tools are designed and made available to the global aerospace manufacturing industry, Iscar’s aerospace industry manager remains in constant communication with all of the major sub- sectors involved.
7 years ago Products
Most recent Articles

Renishaw highlights career pathways in engineering

There is not one singular blueprint that can lead to a career in the engineering industry. It offers a variety of roles, open to people from diverse backgrounds. To highlight the diversity of skills and experiences in engineering, global engineering technologies company, Renishaw, has created the ‘Employee perspectives’ series.
8 hours ago News

Login / Sign up