JPG PDF PNG ? zip

PES Media

  • Articles
    • News
    • Features
    • Products
  • Video
  • Magazine
    • Digital Editions
    • Subcontractor Sourcing Guide
    • Latest Newsletter
    • Editorial Programme
    • Search Engine
  • Literature
  • Events
  • Associations
  • Subscribe
  • Advertising
    • Digital Advertising
    • Editorial Programme 2021
    • Media Pack 2021
    • Rates & Specs
  • Contact Us

Products

1476 results found

Zero-waste, carbon neutral

Responsible manufacturers are rightly placing zero-waste and carbon-neutral ideals at the top of their company policy commitments. Mazak Europe is no exception, however, making a policy into a legitimate and…
3 months ago Michael Tyrrell
products

Straight drilling for cast iron

Tooling specialist Kennametal has introduced an expansion of its solid carbide drilling portfolio, the HPR drill for high-performance drilling of cast iron workpieces.
3 months ago Michael Tyrrell
products

Peter Lehmann turns the tables on university’s VMC 

A member of the Russell Group, the University of York has more than 30 academic departments, amongst them the University’s Department of Chemistry.
3 months ago Michael Tyrrell
products

ETG turning range takes-off with Vulcan TC series

ETG turning range takes-off with Vulcan TC series
3 months ago Dave Tudor
products

Autumn release for new drilling system

Kingswinford, West Midlands-based Allied Machine and Engineering has announced its new high-penetration drilling system, the T-A Pro.
3 months ago Michael Tyrrell
products

Two turning centres take their turn

XYZ Machine Tools’ Compact Turn series of turning centres has proven highly popular over the years. However, not resting on its laurels, the company has responded to customer feedback and…
3 months ago Michael Tyrrell
products

A new definition for deburring

A new process for high precision deburring of gear teeth has been introduced by Horn Cutting Tools, based in Ringwood, Hampshire.
3 months ago Michael Tyrrell
products

New smaller machine for Grob G-series

With the newly developed G150, German machine tool builder, Grob has added to the lower end of its universal machining centre range. The company presented the new machine at its…
3 months ago Michael Tyrrell
products

Hurco open house highlights automation and new driven tool lathes

2020 has been brutally tough on public events but things are slowly starting to change as the industry comes back to life. One of the first companies to bite the…
4 months ago Dave Tudor
products

Achieving chip-free cutting with suction

Ceratizit has introduced its PCD MaxiMill SEC12 face milling cutter to the market to target the machining of crankcases, cylinder heads and other automotive-related components made from aluminium and non-ferrous…
4 months ago Michael Tyrrell
products

The next big thing in small parts production

In Spring 2021, Mills CNC will be introducing a new range of 10” chuck Lynx lathes, with integrated Y-axes, into the market.
4 months ago Dave Tudor
products

Fast quotes for sheetmetal

Generally speaking, companies use manufacturing software to simplify and standardise repetitive processes and avoid duplication of effort. Another important benefit is that information is always current and up to date,…
4 months ago Ed Hill
products

Sequential scheduler enhancements for improved accuracy and reporting

As part of the production planning process for subcontract precision engineering companies, PSL Datatrack's Sequential Scheduler module is designed to assist in the scheduling of shopfloor processes and is subject…
4 months ago Ed Hill
products

Going to extremes  

Tooling expert Walter GB has announced additions to two product ranges that will generate benefits in both deep-hole drilling and turning.
4 months ago Ed Hill
products

Three jaw chuck for cylindrical workpieces

Industrial supplier norelem has introduced a new range of three jaw chucks.
5 months ago Ed Hill
products

New release system and software

New releases of the Gantry Tool Storage (GTS) system and Manufacturing Management Software (MMS) from Fastems are designed to significantly increase manufacturing efficiency, enhance ergonomics and improve overall user experience.
5 months ago Ed Hill
products

Strong demand for new sliding head lathe

Derbyshire-based sliding head lathe supplier Star Micronics GB has witnessed a high level of demand for its eagerly anticipated SX-38 Type A model – with the first UK machine already…
5 months ago Ed Hill
products

Software merger unites manufacturing and design

In September, Autodesk took another step to bring design and manufacturing closer together with PowerMill, PowerShape, and PowerInspect joining the Fusion 360 family of solutions.
5 months ago Ed Hill
products

Making the grade for titanium

Following the introduction of its newly developed IG3I substrate, Horn is optimising its DS solid carbide end mills to enable productive, cost-effective machining of titanium and its alloys.
5 months ago Ed Hill
products

Kasto extends digital networking capabilities

In today’s Industry 4.0 era, digitalisation and networking are rapidly gaining ground to make manufacturing more efficient, flexible and cost-efficient.
5 months ago Ed Hill
products

Push button precision

Changes in ambient temperatures within working environments, and machining parts over long periods of time can all impact on a milling machine's geometry.
5 months ago Ed Hill
products

Appealing updates for versatile large lathe

With the arrival of the new RLX ProtoTRAK control, XYZ Machine Tools was able to offer large capacity turning with the ease of use of ProtoTRAK with its heavy-duty RLX…
5 months ago Ed Hill
products

New 5-axis machine enables two ops in one cycle

Featuring a generous working volume of 815 x 510 x 510mm in a small 2.5 x 1.8m footprint on the shopfloor, the new VC850-5A is the latest prismatic metalcutting machine…
5 months ago Dave Tudor
products

New DMG Mori travelling column machine hits the big time

High precision 5-axis machining of components up to 2,300mm long may be carried out productively on the new DMF 200|8 travelling-column machining centre from DMG Mori.
5 months ago Dave Tudor
products
<< First  | 
< Prev
 | 
Next >

Need some help?

Contact Us

Recent Articles

Making a sculpture using just Prima Power manufacturing tech

Making a sculpture using just Prima Power manufacturing tech

Watch the making of a hi-tech sculpture using...
Siemens steps up industrial network training to plug skills gap

Siemens steps up industrial network training to plug skills gap

Siemens has boosted its professional training...
McLaren worker wins young woman engineer of the year award

McLaren worker wins young woman engineer of the year award

McLaren scientist and engineer, Ella Podmore, has...
An automated busbar production cell in action

An automated busbar production cell in action

In this video, Velden Engineering shows an...
February 2021

Subscribe to our FREE Media Network

INFORMATION

    • Contact Us
    • Privacy
    • Cookie Policy

CATEGORIES

  • Features (2,628)
  • Literature (177)
  • News (5,578)
  • Products (1,476)
  • Video (618)

TAGS

  • rifle barrel
  • Ansty Park
  • inspection
  • subsea
  • Chucks

OUR OTHER MAGAZINES

Aerospace Manufacturing Logo Composites in Manufacturing Logo

CONTACT INFORMATION

  • PES Magazine
  • MIT Publishing
  • Featherstone House
  • 375 High Street
  • Rochester
  • Kent
  • ME1 1DA
01634 830566

Back To Top

1998 - 2021 © MIT Publishing
Site designed & developed by TJC