Turbine blade perfection from bar

Investment in Starrag machine tools at aerospace specialist JJ Churchill has enabled the company to develop its own process for machining turbine blades from bar as opposed to forgings, providing substantial benefits for blade manufacture. PES reports.

JJ Churchill continues to set the bar in gas turbine blade machining by building on its success in machining blades complete from solid in a single set-up, rather than machining larger batches of forgings.

Working closely with machine supplier Starrag, the company is now developing specific production processes intended to consistently produce time and manufacturing benefits through the implementation of both in-process probing (before machining commences) and adaptive milling routines.

Both techniques are intended to result in unprecedented savings in overall production times as well as improved surface finishes to eclipse the 0.7/0.8 Ra currently being achieved by JJ Churchill when using a ‘super finish mode’ on the Starrag machines.

In fact, the developments – which are being evolved in close cooperation with the Swiss machine tool builder that has so far supplied five high-speed, 5-axis machining centres, with another on order, to the company – are among a number of initiatives being led by JJ Churchill’s head of engineering, Will McAleese and his team.

According to Mr McAleese: “It is some time now since we’ve proved that machining blades from bar has a number of advantages over the traditional route of machining forgings, not least the fact that the process negates the need for relatively large batch sizes – one-offs to 90-off are feasible compared to a minimum batch of around 300-off when oversize (usually by 3mm) forgings are used. And the resultant time savings can be significant when it is accepted that lead-times for forgings can sometimes be one year.

“In addition, blade integrity from billet compares with that from a forging, and milling from solid means that blade aerofoils can be held to the same tolerances – at least 25µm radially and axially as well as on alignment.”

Joint development projects

The springboard into such a highly flexible method of blade production was mapped out by the Market Bosworth (Midlands) company in 2008, when it started its association with Starrag UK for machine supply and with Starrag Switzerland on the joint development of the process and programming/cutting parameters for the machining of double-ended stators.

Its so-called ‘fast-make’ strategy has since been applied to a number of contracts among its blue-chip customer base that includes first-tier status with companies such as Rolls-Royce, Siemens and Safran.

Now, however, blade machining continues to be refined, as Mr McAleese explains: “A blade is conventionally held by clamping on the machine’s tailstock/driven head and, rather than machining commencing on the assumption that the blade is positioned and held accurately every time – which isn’t always the case. We’re now probing the root (using a probe held in the machine’s tool magazine) to accurately locate its position.

“Using Starrag’s RCS CAM software, the machining program then automatically adjusts to the blade’s true position within the machine and determines the best fit position of the blade in relation to the root. This means we can eliminate the need to measure the blade by CMM after machining and, if necessary, adjust and rewrite programs then undergo a period of post-programming before we can re-start machining. The potential time savings are extraordinary if we can ensure this probing regime is consistently faultless.”

Adding value

Starrag is the preferred supplier to JJ Churchill for aerofoil machining and is applying the full effect of its ‘Engineering precisely what you value’ strategy to JJ Churchill’s blade manufacturing routines. It developed RCS specifically for 5-axis high-speed blade machining.

With an extended selection of machining strategies, RCS provides highly efficient and effective programming due to its parametric input structure, and cycle times are minimised via the software’s optimal selection of milling strategies – taking the best and most effective cutter path in relation to blade cusp height and tool radius.

The latest (version 7.4) of the RCS suite includes improved routines for snubber machining, trochoidal milling and reduced tool wear, while significantly reducing pre-production programming times.

Used by JJ Churchill in conjunction with Unigraphics CAD, RCS enables programmers to create difficult features such as variable fillet radii, for example, and JJ Churchill has also developed an in-process polishing routine for the Starrag machines where blades are rough milled to within 2-3mm of final form before finish machining with Starrag’s ‘super finish mode’ which sees blades finished to typically 0.7/0.8 Ra and even 0.4 Ra has been achieved.

RCS’s capability for adaptive milling is also being put to work by JJ Churchill on creating perfect blends on aerofoils, on both bar and forged blades – a technique where Haimer heat shrink tooling and 2mm diameter ball nose cutters also play key roles.

“Better surface finish is the result of improving and decreasing the cutter step-over,” says Mr McAleese. “As well as creating far less stress on the material and improved process capability in addition to extended tool life.”

He adds: “The new processes are working well and we are looking to standardise probing across all our Starrag machines (three LX051s, one SX 051B (the LX 051’s predecessor) and a LX151, plus the additional LX 051 that is currently on order.”

Early pioneers

JJ Churchill has a long history of machining, with compressor blades being supplied to Rolls-Royce since 1947 (turbine blade production was added subsequently). Company founder Walter Churchill worked with Air Commodore Sir Frank Whittle, who is recognised as the inventor of the turbojet engine.

Today, the company not only specialises in the prototype development and spares supply on a variety of aircraft programmes, but it also is playing a key role in OEM production programmes for both compressor and turbine blade work, which currently account for 35 and 65% of business, respectively, including a recently-signed £70 million contract with Rolls-Royce for the supply of turbine blades on a rolling ten-year programme.

Coupled with a host of quality standards and accreditations, JJ Churchill’s continual process developments also include 3D printing of fixturing and work into blade machining, from solid, of titanium aluminide, “again working closely with Starrag,” says Mr McAleese.

He concludes: “We’ve jointly investigated the machining strategies (in particular terms of tool speeds and feeds) required for such a brittle material, and the use of trochoidal milling that generates less continuous/overall contact with the workpiece and therefore less stress on the tool.”

Starrag UK www.starrag.com

JJ Churchill www.jjchurchill.com

Company

JJ Churchill

Related Articles

Technology collaboration

The MTC in Coventry is exhibiting the Porsche 919 Hybrid racing car in its reception area until the start of the MACH show when it will move to the DMG Mori stand at the NEC in hall 5 on stand 5610.
8 years ago Features

Loads better

Mills CNC reports that it is increasingly being approached by manufacturers to help design and implement what, in many instances are innovative manufacturing turnkey and process improvement solutions.
8 years ago Features
Most recent Articles

Renishaw highlights career pathways in engineering

There is not one singular blueprint that can lead to a career in the engineering industry. It offers a variety of roles, open to people from diverse backgrounds. To highlight the diversity of skills and experiences in engineering, global engineering technologies company, Renishaw, has created the ‘Employee perspectives’ series.
13 hours ago News

Login / Sign up