A quick route to multi-pallet machining

The Hermle C 400 HS Flex machining cell installed by Kingsbury at Stoneswood Precision, Dukinfield
The Hermle C 400 HS Flex machining cell installed by Kingsbury at Stoneswood Precision, Dukinfield

The first machining centre built by German manufacturer Hermle to be installed at a Hyde Group company has been operating around the clock since April this year at Stoneswood Precision Components in Dukinfield, Greater Manchester.


The new machine had to be installed at short notice to avoid a potential production bottleneck. PES reports.

The C 400 5-axis vertical machining centre (VMC), supplied by sole agent Kingsbury at Stoneswood Precision Components has been automated with the machine manufacturer's HS Flex pallet storage and retrieval system to enable unattended subcontract production overnight and at weekends.

Stoneswood Precision's managing director Charles Day comments: "We looked at four options before deciding to buy the Hermle cell. Its major differentiator is the ability to stop automatic production quickly and use the machine in manual mode to manufacture a one-off part. The other solutions we looked at could not achieve that easily.

“The flexibility it provides is already proving useful as it is allowing us to machine fixtures during the day and simultaneously set up the HS Flex for lights-out running overnight. The cell's connectivity also fits well within the Industry 4.0 environment that we are creating in our factory.”

Machining of a control box component

Stoneswood Precision's current facility was set up in 2004 to produce 450 different aluminium and titanium parts for a military aircraft, involving machining of mainly wing details. Already a user of several multi-pallet production systems based on horizontal machining centres, the subcontractor needed an additional system to fulfil a different contract for the manufacture of aluminium control boxes.

Initially, an older 5-axis VMC with a B-axis spindle was employed to produce the suite of 48 bodies, sides and lids for the control box variants, which range in area from 75 x 150mm to 300 x 300mm and from 5 to 20mm deep. The components are smaller and more complex than most of the predominantly aerospace parts produced at the Dukinfield facility and the HMCs are too large to machine them efficiently.

Searching for a cell


The original process required the use of a coolant-driven, right-angle attachment for drilling holes in the sides of components to avoid further set-ups. The tool, while in many ways fit for purpose, could not hold the positional tolerances required, down to 100µm true position.

A view inside the HS Flex automated storage and retrieval system

Drilling was not sufficiently repeatable over a batch of components and therefore a new engineering solution was sought, resulting in the installation of the new production cell based on the trunnion-type Hermle C 400 5-axis machine.

Mr Day continues: “Apart from the control box work dictating the use of a 5-axis VMC, there are parts of other aerospace contracts that lend themselves to a vertical-spindle production platform and many new enquiries we receive also require such capacity. So the choice of a second VMC, particularly with automation, made sound business sense.

“I had never heard of the Hermle brand but Paul Mellor, technical director of the Hyde Aero Products division of which we are a member, was familiar with the manufacturer.

“Some of our staff also travelled to a user of a smaller HS Flex system in the North East and came back with very positive reports, including from the shopfloor, so we decided to place the order. Luckily the C 400 was in stock at Kingsbury, so it was available quickly to solve a looming production bottleneck, whereas other potential suppliers were quoting lead-times of up to a year.”

Mr Day adds that he was impressed that the machine was quickly into service after it arrived onsite, with final commissioning within nine days, after which the machine started producing components straight away.

This was down to the prior provision from the supplier of a CAD model of the C 400, which allowed early 3+2 axis programming of parts in Catia, cycle simulations in Vericut and the design and production of fixtures. The latter exercise was helped even further by Kingsbury's delivery to Dukinfield of an actual machine pallet.

The advance preparation made the onsite training provided by a Kingsbury engineer over a period of five days more productive than if the subcontractor's staff had still been at the start of developing the processes.

Coolant flexibility


Another facet of the C 400 cell that Mr Day appreciates is programmable coolant pressure between zero and 80 bar, providing engineering flexibility including the potential use of the coolant-driven drilling head in future projects.

Some smaller components are machined four at a time on tombstones produced internally by Stoneswood Precision on the Hermle

The specification of the Hermle cell includes an 18,000rpm/20kW spindle, extended tool capacity from the standard 38 pockets by the addition of an 88-position magazine for HSK-A63 tools with breakage monitoring and measuring included, a Heidenhain TNC 640 control, 850 x 700 x 500mm working area, +91/-139° trunnion swivel, 500 x 400mm pallet size and capacity for 12 of them on two levels in the HS Flex store, which is served by a 3-axis pallet handling unit with rotary, lift and linear motions.

The store is controlled and managed by Hermle's proprietary Automation Control System, which enables smart order management via a touch panel. It is currently being interlinked with an MES (manufacturing execution system), recently installed in Dukinfield by Forcam, which is compatible with Stoneswood Precision's SAP ERP (enterprise resource planning) software.

It allows production orders to be sent directly to all machines for improved job sequencing, leading to optimised production output. The resulting provision of enhanced data, including of machine utilisation, is taking the subcontractor's operation further along the road of Industry 4.0.

Currently, the Hermle C 400 HS Flex is devoted to the control box contract, which entails supplying 300 assembled housings annually. All components are machined either individually on a pallet or four at a time on a tombstone, depending on size, from solid aluminium billet in two operations involving milling, drilling and thread milling cycles lasting up to two hours per side. True position of the holes is now well within tolerance.

Kingsbury www.kingsburyuk.com

Company

Kingsbury UK

Related Articles

Handling the heavy stuff

The two largest models in Hermle's C-series of trunnion-type 5-axis machining centres, C50U and C60U, may be fitted with a new pallet changing system to automate the production of workpieces up to 2.5 tonnes in the case of the larger machine.
8 years ago Products
Most recent Articles

Renishaw highlights career pathways in engineering

There is not one singular blueprint that can lead to a career in the engineering industry. It offers a variety of roles, open to people from diverse backgrounds. To highlight the diversity of skills and experiences in engineering, global engineering technologies company, Renishaw, has created the ‘Employee perspectives’ series.
21 hours ago News

Login / Sign up