MACH 2024: Holding firm

Exhibited on NCMT’s stand amongst a wealth of other products will be the Blue Photon photo-activated adhesive system.

The method is ideal for securing awkwardly shaped parts to allow maximum access to tools for tight-tolerance machining or inspection.

The process involves applying an adhesive that is cured by ultraviolet light via an LED spot curing system. After machining is complete, the adhesive contact points can be sheared to free the workpiece by rotating the gripper pins in the fixture plate with a spanner. The residual adhesive can subsequently be removed by application of hot water.

Use of the technique is predicted to grow due to its ability to hold components securely with a shear resistance of up to 200kg per gripper point, while allowing cutters excellent all-round access for machining on five sides. Unlike magnetic clamping systems, it can be used to secure non-ferrous metallic parts, including ceramics and composites.

Blue Photon is ideal, for example, for clamping a turbine blade to enable the fir-tree and wedge face on the root as well as the shroud end features to be machined in one hit, without tolerance build-up. Traditionally, due to clamp interference, multiple operations are required.

A novel turbine blade fixture incorporating four gripper inserts has been designed by NCMT that, once adhesive has been applied and cured, holds a blade securely by one side of the aerofoil.

Tests have shown that the clamping force produced by the fixture can easily withstand the rigours of machining. Material removal rate actually exceeded that achieved when the blade was mechanically clamped, as in the latter case the pressure had to be limited to avoid component distortion and marking.

Other advantages of Blue Photon workholding are good damping properties to suppress chatter, reduced cost of fixtures for holding complex parts, and elimination of locating lugs on castings.

NCMT
www.ncmt.co.uk
Hall 19, Stand 130

Related Articles
Most recent Articles

Group Rhodes goes for growth in its 200th year

Group Rhodes, a Wakefield-based OEM active in the metalforming, composite forming and heavy ceramic sectors, has significantly expanded its workforce over the last six months to meet the needs of its ever-growing customer base across its four divisions.
3 days ago News

AI advances for CAM programming

In this Q&A, Dr Andy Cheadle, chief technology officer at CloudNC discusses the latest advances of its CAM Assist manufacturing software, designed to end the bottleneck created by manual CAM programming.
3 days ago Features

Login / Sign up