Space age micro metrology

Space age micro metrology
Space age micro metrology

Microtec, an EDM subcontractor and toolmaker, has installed Nikon Metrology CNC video measuring to speed accreditation to the AS 9100 aerospace quality management standard. Solutions reports.

What does an orbiting telescope currently mapping the Milky Way have in common with the first all-English wristwatch to be produced in half a century? UK subcontractor Microtec EDM, Basildon, has supplied prototypes and components for both ventures as well as for a host of other innovative and high profile projects.

The company recently raised the capability of its metrology department significantly by purchasing a powerful CNC video measuring system, an iNEXIV VMA-4540 from Nikon Metrology.

Until the machine was installed at the end of 2014, Microtec relied on manual video measuring using another make of instrument. Owner and managing director, Graham Cranfield comments: “We are currently seven years into an 18 year contract involving electro discharge machining (EDM) and centreless grinding of nickel copper alloy tube to produce a decoy missile component.

“A complete inspection of the part using our manual video measuring system used to take 20 minutes. Now that the job has been programmed on our new Nikon machine, the same inspection cycle is completed automatically in just 20 seconds. We find that time savings of this magnitude are typical and have revolutionised the productivity of our metrology department.”

Mr Cranfield explains that it took only a few hours to create the inspection cycle for this fairly complex job based on a CAD model of the part. The process will become even shorter as company employees become more familiar with programming.

Time saving

For contracts that frequently repeat, the automated measuring approach saves a lot of time in the long-term. Even after measuring a dozen of the missile tubes, the programming time had been justified. The component is actually required in quantities of a few thousand every year and even though only one in 12 needs to be inspected, the saving in measuring time during 2015 alone will be more than double the programming time.

By the same reasoning, prototypes and components needed in small batches are more productively inspected manually on the pre-existing video measuring machine, or indeed on the iNEXIV VMA-4540 operated in manual mode.

Work carried out by Microtec for space missions includes making parts for the joint ESA/JAXA (Japan Aerospace Exploration Agency) BepiColombo mission to Mercury, which will set off in July 2016 on a seven and a half year journey to the smallest terrestrial planet in our solar system. Another project involves the manufacture of prototypes and components for an orbiting telescope.

In both cases, the telescope parts are relatively large but many other components that the Basildon subcontractor produces go down to 20µm in size. This places the firm in a very select group of specialist providers of wire-cut EDM and spark-erosion services in the UK.

A current project in the micro area entails sparking 30µm wide slots 3mm deep into copper for Reaction Engines, Oxford, which is designing a multi-use, Mach 5 engine for launching satellites. A further project is the wire-erosion of 70µm wide vanes in copper and molybdenum grids, required in quantities of 50 per year for an electron beam gun.

On the clock

Somewhere between these extremes in size lie the components Microtec machines for Charles Frodsham & Co, clockmaker to the British Royal family.

In 2015, managing director Philip Whyte plans to launch the first all-English-made wristwatch to be produced on a production basis in half a century. It will be manufactured from start to finish under one roof at the company's workshop near Heathfield, East Sussex.

Charles Frodsham has a longstanding business relationship with Microtec. The subcontractor regularly wire-erodes gold watch cases and produces springs for the clockmaker, which in turn carries out micro-scale turning, milling and drilling that is beyond the capabilities of Microtec's production equipment.

A smaller Nikon Metrology CNC video measuring machine has been in use at Charles Frodsham's Hastings workshop for about five years. Mr Whyte recommended this make of instrument to Microtec due to its reliability and precision, as well as the strength of aftersales support.

Aerospace and defence contracts are the mainstay of Microtec's business – Rolls-Royce, BAE Systems, Selex Galileo and Astrium being regular clients. It is the principal reason for Microtec seeking AS 9100 accreditation, a process that will be assisted by the purchase of the Nikon Metrology iNEXIV machine.

This will be especially important for speeding production of first article inspection reports. The Nikon Metrology VMA AutoMeasure software automatically compares measured results against CAD models and allows such reports to be produced quickly and in standardised format.

Motorsport, closely related technologically with aerospace, is also becoming an increasingly important target market for the subcontractor. Medical and dental industry work, which is often defined by complex machining in difficult materials, is another specialism. A current contract involves producing very small tweezers with serrations that are eroded with 20µm wire, five times thinner than an average human hair.
Wider markets

Projects are also carried out in other industries, such as for premium vehicles including Mercedes and for top-end hi-fi equipment manufacturer, Rega Research, Southend, for which Microtec manufactures parts for a moving coil cartridge.
Production continues 24/7 at the Basildon factory in a range of materials from aluminium, copper and steel to titanium and exotic alloys. Eight AgieCharmlles EDM machines provide a majority of manufacturing capacity, assisted by Hurco vertical machining centres, a Ghiringhelli centreless grinder and various manual machine tools.

Most wire-cut EDM work requires 2D inspection, for which video measuring is ideal. However, some spark eroded components need to be measured in 3D and one of the advantages of iNEXIV video inspection is the ability to measure heights using the instrument's generous 73.5mm working distance.

Inspection in 3D extends to mould making. Early in January 2015, Microtec was tasked with refurbishing a plastic injection mould for producing electrical plug sockets for the British manufacturer, MK. No drawings or CAD model were available, so the mould's broken upstands were remanufactured in tool steel by measuring the height and width of the relevant sections on the iNEXIV.

A similar procedure allows reverse engineering of legacy components for which no data exists such as parts for classic cars. In this case, after the data has been collected, a DXF file is output that can be used directly in a machine tool's CNC or in a CAD/CAM system to generate the cutter paths. Nikon Metrology's part to CAD software provides the capability to compare the machined component with the DXF file to ensure that it is within tolerance.

Some features on components, such as sloping faces and undercuts, do not lend themselves to optical measurement. In such cases, the iNEXIV VMA-4540 has the facility to accept a Renishaw TP20 or TP200 touch probe to capture the point data. The probe is offset from the optical axis but works in the same 450mm x 400mm x 200mm coordinate space with only slightly reduced operating range.

Mr Cranfield continues: “We always use vision if we can as in general it is quicker and more accurate. However, if parts are not the right shape or not scrupulously clean, touch probing is the better option. On the other hand, some features would be difficult to inspect with a touch probe such as the curved surface of a dome as calculations to compensate for the stylus tip diameter at each measurement point across the surface would be impractical.

“Using the auto focus (AF) feature of the iNEXIV, we can accurately capture heights very quickly. There is also a laser AF option that we are thinking of retrofitting that is very good at highly repeatable Z-axis measurements on flat surfaces.”
It is even possible to mix optical and tactile measurements in the same cycle, which is another option that Microtec will be using. For example, the BepiColombo telescope parts require mainly 2D optical inspection of apertures, but there are arrays of 2mm diameter tapped holes whose positions will need to be probed during the same program.

This job will benefit from image stitching within the Nikon Metrology software as the aluminium components are 550mm in diameter and will need to be scanned in four quadrants under the 450mm by 400mm X / Y travels of the iNEXIV's moving column. Additionally, stitching of multiple images at different Z-axis heights allows deep components to be rendered all in focus.

The instrument's versatility is further enhanced by a variety of illumination options. It has episcopic, diascopic and eight segment ring LEDs and combining these enables accurate detection of low contrast edges.

Even when a workpiece is misaligned, an intelligent search feature automatically locks on to it based on a target image recorded in a teaching file. Detection is assisted by the wide field of view, measuring 13.3mm by 10mm at 0.35x magnification, while zooming in to 3.5x in five steps delivers accurate measurements as well as high resolution images.

NIKON METROLOGY
www.nikonmetrology.com

MICROTEC EDM
http://microtecedm.co.uk

Related Articles

Hard facts

Bowers Group has announced the release of a new range of micro hardness testing machines from Innovatest.
8 years ago Products

Generating power with precision

Wind turbines require extreme accuracy in their blade profiles to generate electricity efficiently. Turbine manufacture Vesta Offshore Wind has selected Faro to improve its inspection process. Solutions reports.
8 years ago Features

Hastening measurement on the screws

When medical component specialist Tecomet OEM Solutions needed faster measuring to keep up with increased demand for its orthopaedic screws it turned OGP to provide an optical measuring solutions. Solutions discovers more.
8 years ago Features
Most recent Articles

Renishaw highlights career pathways in engineering

There is not one singular blueprint that can lead to a career in the engineering industry. It offers a variety of roles, open to people from diverse backgrounds. To highlight the diversity of skills and experiences in engineering, global engineering technologies company, Renishaw, has created the ‘Employee perspectives’ series.
11 hours ago News

Login / Sign up