Rolls-Royce reveals details of Tempest fighter jet's engine

Tempest fighter jet engine 200320
Tempest fighter jet engine 200320

Rolls-Royce has been developing world-first engine technology for the Tempest fighter jet programme over the last five years.

In order to make the engine more electric, intelligent and harness more power, the company recognised that any future fighter aircraft will need new levels of electrical power demand and thermal load.

Before the launch of the Tempest programme, Rolls-Royce had already started to address the demands of the future. In 2014 the company took on the challenge of designing an electrical starter generator that was fully embedded in the core of a gas turbine engine, now known as the Embedded Electrical Starter Generator or E2SG demonstrator programme.

Conrad Banks, chief engineer for future programmes at Rolls-Royce said: “The electrical embedded starter-generator will save space and provide the large amount of electrical power required by future fighters. Existing aircraft engines generate power through a gearbox underneath the engine, which drives a generator. In addition to adding moving parts and complexity, the space required outside the engine for the gearbox and generator makes the airframe larger, which is undesirable in a stealthy platform.”

Image: Rolls-Royce

Phase two of this programme has now been adopted as part of Rolls-Royce’s contribution to the Tempest programme.

As part of this journey, the company has been continuously developing its capabilities in the aerospace market, from gas turbine technologies through to integrated power and propulsion systems.

The company’s goal has been to provide not only the thrust that propels an aircraft through the sky, but also the electrical power required for all the systems on board as well as managing all the resulting thermal loads.

Rolls-Royce thinks all future vehicles, whether on land, in the air or at sea will have significantly increased levels of electrification to power sensors, communications systems weapons, actuation systems and accessories, as well as the usual array of avionics.

The launch of phase one of the E2SG programme saw significant investment in the development of an integrated electrical facility – a sophisticated test house where gas turbine engines can be physically connected to a DC electrical network.

The launch of the second phase of the project in 2017 saw the inclusion of a second electrical generator connected to the other spool of the engine. It also included an energy storage system in the electrical network and the ability to intelligently manage the supply of power between all these systems.

The two-spool mounted electrical machines allows, by combination of operation as either a motor or a generator, the production of a series of functional effects on the engine, including the transfer of power electrically between the two spools.

As part of the E2SG programme, Rolls-Royce is investigating the feasibility of using dual spool generation to influence the operability, responsiveness and efficiency of the engine. Another key technology under development is the Power Manager intelligent control system, which uses algorithms to make real time intelligent decisions about how to supply the current aircraft electrical demand while optimising other factors including engine efficiency to reduce fuel burn or engine temperature to extend component life.

Throughout the Tempest programme, Rolls-Royce will be continuing to mature the electrical technologies demonstrated by the E2SG programme, with a third phase of testing likely to include a novel thermal management system being integrated with the overall system, as well as more electric engine accessories.

The company also intends to showcase a full-scale demonstrator of an advanced power and propulsion system. There will be new technologies in all parts of the gas turbine, including twin spool embedded generation to higher power levels, an advanced thermal management system, an energy storage system tailored to the expected duty cycle of the future fighter and an intelligent power management system which will be able to optimise the performance of both the gas turbine and the power and thermal management system.

Rolls-Royce www.rolls-royce.com

Company

Rolls-Royce

Related Articles

Flying high for engineering

The Farnborough International Airshow (FIA) is a showcase to display some of the UK’s most advanced manufacturing. Ed Hill hears how the organisers are helping the industry to generate new business.
7 years ago Features

Farnborough closes on a real high

At the close of the Farnborough International Airshow five day trade exhibition organisers confirmed that the show had recorded orders and options to the value of US$123.9 billion defying industry expectations.
7 years ago News

Making the grade in aerospace

To ensure that the most efficient, cost-effective cutting tools are designed and made available to the global aerospace manufacturing industry, Iscar’s aerospace industry manager remains in constant communication with all of the major sub- sectors involved.
7 years ago Products
Most recent Articles

ETG to host first sheetmetal event

On 4th June, Engineering Technology Group (ETG)’s fabrication division will host a sheetmetal event in conjunction with its trusted fabrication principal, Durma.
14 hours ago News

Precision holemaking from Allied Machine & Engineering

Allied Machine & Engineering, a specialist manufacturer of holemaking and finishing tools for the metalcutting industry, was at MACH 2024. The company's tooling solutions delivers low cost per hole in a wide range of drilling, reaming, burnishing, threading, and boring applications.
16 hours ago Videos

King’s Award for exports goes to Cambridge Precision

Cambridge Precision has been announced as a recipient of the King’s Award for Enterprise for International Trade. The King’s Awards for Enterprise are the most prestigious awards for UK businesses, recognising and celebrating business excellence across the UK.
16 hours ago News

Login / Sign up